Kramer VM−3HDT is a high−quality, long−reach 1:3 HDBaseT extender distributor that takes one HDMI input, with IR and RS−232 control signals, converts it to an HDBaseT extension line signal and distributes it to 3 HDBaseT outputs that connect to compatible HDBaseT receivers. VM−3HDT includes an HDMI LOOP output for connecting to an additional unit in a daisy chain.

The VM−8HN is a 1:8 distribution amplifier, with two loop ports, for 4K@60Hz (4:2:0) HDMI 2.0 signals complying with HDCP 1.4 content protection standard. The unit takes one HDMI input, equalizes and reclocks the signal and distributes it to eight identical outputs and two additional looping outputs.

The 1:8 HDMI Distribution Amplifier is the perfect solution for anyone who needs to send one source of digital high definition video to multiple displays at the same time. It supports all HDMI equipment, such as DVD players and satellite set top boxes and all HDMI displays. HDMI is a digital point to point interface for audio and video signals. In operation, the digital video source is connected to the distribution amplifier on one side. On the other side, eight HDMI outputs are available to be used in part or in full. Once the unit is connected and powered, your source is routed to up to eight digital displays at the same time.

Simply connect your HDMI video source to the 1:8 HDMI Distribution Amplifier’s input using the supplied HDMI cable. Then connect up to eight HDMI displays to the unit’s eight HDMI outputs. Once connected and powered, your source will be seen on all eight displays at the same time. This HDMI product supports BOTH Audio and Video signals.

The EXT-HDMI-144-BLK 1×4 HDMI Splitter from Gefen is an HDMI splitter that features (1) input and (4) outputs. Distribute an HDMI signal to up to (4) HDTV digital display with this unit. It is well suited for use with DVD players, DVRs, set-top boxes, and other HDTV devices.

Multiple units can be connected together to achieve a larger distribution configuration. All displays simultaneously display the signal on the first and primary HDMI output. It will support HDTV resolutions up to 1080p & 2k and computer resolutions up to 1920 x 1200. The splitter is HDMI- and HDCP-compliant.

The SVDA 6MX is a one input, six output S-Video (S-VHS & HI-8) Distribution Amplifier. Compatible with NTSC, PAL or SECAM, the output is split into six different independently buffered and amplified outputs and driven up to 150 feet.

The Extron DA6 RGBHV is a six output, rack-mountable, analog distribution amplifier. It accepts and distributes RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video on female BNC connectors. In addition, the DA6 RGBHV provides DIP switches for adjusting RGB gain and peaking, as well as for selecting AC or DC coupling. A 9-pin contact closure connector allows for output muting controls when used with a control system.

With 350 MHz (-3 dB) video bandwidth, fully loaded, the DA6 RGBHV is perfect for maintaining signal integrity over long cable runs It includes an internal international power supply and is housed in a 1U, full rack width metal enclosure for mounting convenience.

This four port VGA splitter allows a single computer to transmit the same signal to four different monitors simultaneously. This is a great solution for conference rooms and classroom environments.

The Monoprice 16 Way Active Powered VGA/SVGA video splitter is a distribution amp allowing you to drive up to 16 VGA displays simultaneously.