Narrow by:

AJA HA5

AJA HA5

Mini Converter: HDMI to HD-SDI/SDI Video & Audio Converter

AJA HA5

The HA5 HDMI to SD/HD-SDI Video and Audio Converter from AJA converts (1) HDMI signal to SD- or HD-SDI output and is capable of embedding up to (8) channels of HDMI audio into the output signal for a single-cable audio-video connection. It features (2) SD/HD-SDI outputs.

This unit equalizes the input signal to support extended HDMI cable runs of up to 131′. PLL clock filtering is included to produce low jitter on output signals. LED lights provide a visual indicator of line status. It does not support HDCP content, meaning copyright-protected media may not display correctly with this device.

SKU: CNVHA5 Categories: Converters, Video

11.25′ x 20′ AV Stumpfl Full White Screen

16:9 Aspect Ratio

11.25′ x 20′ AV Stumpfl Full White Screen

Front projection screen material Flex White CI – 100% light-tight, flame resistant.

Gain factor: 1.02; viewing angle: +/- 50°

SKU: FW1120SKIT Category: 16:9 Aspect Ratio

AJA HA5-PLUS

AJA HA5-PLUS

HDMI to HD/SDI Video & Audio Converter

AJA HA5-PLUS

The AJA HA5-Plus HDMI to 3G-SDI Mini-Converter allows you to output an HDMI signal to an SDI monitor, recorder, or other device in up to 1080p/60 4:2:2 10-bit. Up to eight channels of HDMI embedded audio can be passed through to the SDI output, or you can connect independent RCA analog audio and embed it on the SDI output.

When you connect RCA audio, you can decide whether to output the HDMI embedded audio or RCA audio or assign particular channels of each using AJA’s free-download MiniConfig control software. MiniConfig also provides detailed information about the current input and output formats, allows you to control all the parameters of the HA5-Plus, and lets you download firmware updates. It’s compatible with Mac and PC and interfaces with the converter via a USB connection between the converter and the computer.

The HA5-Plus features a compact, portable, and rugged design and comes with a universal power supply with international plugs for use around the world.

SKU: CNVHA5P Categories: Converters, Video

AJA HA5-4K

AJA HA5-4K

4K HDMI to 4K SDI Mini-Converter

AJA HA5-4K

The HA5-4K 4K HDMI to 4K SDI Mini-Converter from AJA provides high-quality conversion of 4K HDMI to 4K SDI via a quad-link 3G-SDI output at frame rates up to 50/60 fps. It also supports SD, HD, and 2K HDMI to SDI conversion as well. The HA5-4K automatically senses incoming HD/2K resolution HDMI signals and convert them to a single 3G-SDI output. Up to eight channels of HDMI embedded audio can be passed through to the SDI output, ensuring your audio is always in sync with the SDI signal. The HA5-Plus features a compact, portable, and rugged design and comes with a universal power supply with international plugs for use around the world.

SKU: CNVHA54K Categories: Converters, Video

AJA V2Analog

AJA V2Analog

HD/SD-SDI to Analog Mini-Converter

AJA V2Analog

The V2Analog HD/SD-SDI to Analog Mini-Converter from AJA provides SDI digital to component/composite analog conversion at either HD or SD resolutions. It is ideal for integrating analog equipment such as monitors and tape decks into digital workflows. It utilizes a full 10-bit data path to ensure a high-quality conversion. Its low power consumption and compact size, makes it suitable for use on set or in AV installations integrating different signal types.

The V2Analog supports NTSC, PAL, 720p at 50/59.94/60 Hz, 1080i at 50/59.94/60 Hz, and 1080psf at 23.98/24/25 Hz. The converter accepts incoming digital SDI signals and converts them to analog YPbPr (SMPTE, EBU-N10), Betacam, or RGB component outputs, and NTSC/PAL or S-Video composite outputs. It is important to note that the V2Analog does not up-convert or down-convert between SD and HD resolution. Only digital to analog signal conversion is performed, therefore an HD-SDI signal will be output as an HD analog signal and won’t be compatible with devices that only accept SD analog signals.

SKU: CNVSA Categories: Converters, Video

AJA HD10AMA

AJA HD10AMA

HD/SD-SDI 4 Channel Analog Audio Embedder/Disembedder

AJA HD10AMA

The AJA HD10AMA is a 4-channel analog audio embedder/disembedder that works with an SDI media signal. This device operates at a dual rate offering high-definition and standard-definition functionality; it has the ability to extract 4 balanced audio channels and output them on XLR connectors. The user also has the ability to select the embedding process, accepting balanced audio and embedding 4 channels with the SDI video signal.

SKU: CNVAUDHD Categories: Converters, Video

Avitech Multiviewer VCC-8008U

Avitech Multiviewer VCC-8008U

Avitech Multiviewer VCC-8008U

The VCC-8000 series was developed to meet the needs of professionals working with _le-based systems. VCC-8000 multiviewers allow users to effortlessly combine up to four (4) DVI-I/VGA and four (4) HD/SD-SDI/ Composite Video signals on a single display. Usable in standalone or cascaded systems with up to eight (8) VCC-8000 and/or MCC-8004 modules, VCC-8000 modules can provide facility-wide computer and video monitoring capabilities.

VCC-8000 modules support high-clarity applications in resolutions up to 1920 x 1200. For true customization, input windows can be freely resized and positioned on displays. A versatile on-screen display provides customizable on-screen labels, borders and alarms to meet the varied needs of users.

SKU: MVWAVIT Categories: Multiviewers & Multi-Displays, Video

AJA ROI

AJA ROI

DVI to SDI Mini-Converter

AJA ROI

AJA’s ROI DVI to SDI Mini-Converter converts a DVI signal to an SDI output, enabling you to use computer signals in digital video workflows. A DVI loop through will allow you to monitor the input locally, and a reference input will let you genlock the SDI output. Both the DVI input and loop through support optional DVI-to-HDMI adapters, so you can convert HDMI to SDI and/or monitor your input on an HDMI display.

SKU: CNVROIDVI Categories: Converters, Video

DataPath DL8

DataPath DL8

DVI Dual Link Matrix

DataPath DL8

The Datapath dL8 is an eight output distribution amplifier for ultra-high resolution Dual Link DVI signals providing a programmable, flexible and low cost solution for any video wall display. When used in conjunction with multiple Datapath x4 wall controllers, the number of supported outputs increases four times per x4. This allows for the creation of large video walls and can display a single input to a video wall with as many as 100+ screens. Input content can be cropped, sliced, rotated to display unique content on any area of the displays.

One dual-link DVI output, supporting graphics sources with pixel clocks up to 330MHz and resolutions beyond Quad-HD (3480 x 2160), can be delivered to eight outputs on separate DVI-D (dual-link) connectors. This Distribution Amplifier supports up to 65 feet even at full dual-link resolutions due to additional active equalization and re-clocking hardware, allowing convenient location for flexible display designs.

The Datapath dL8 is an eight output distribution amplifier for ultra-high resolution Dual Link DVI signals providing a programmable, flexible and low cost solution for any video wall display. When used in conjunction with multiple Datapath x4 wall controllers, the number of supported outputs increases four times per x4. This allows for the creation of large video walls and can display a single input to a video wall with as many as 100+ screens. Input content can be cropped, sliced, rotated to display unique content on any area of the displays.

One dual-link DVI output, supporting graphics sources with pixel clocks up to 330MHz and resolutions beyond Quad-HD (3480 x 2160), can be delivered to eight outputs on separate DVI-D (dual-link) connectors. This Distribution Amplifier supports up to 65 feet even at full dual-link resolutions due to additional active equalization and re-clocking hardware, allowing convenient location for flexible display designs.

SKU: DADVIDL8 Categories: Multiviewers & Multi-Displays, Video

AJA HDP2 Mini Converter

HD-SDI/SDI to DVI-D and Audio Converter

AJA HDP2 Mini Converter

The HDP2 is a miniature HD-SDI/SDI to DVI-D converter for digital display devices, such as LCD, DLP, and Plasma monitors or projectors. Using a very high quality scaling engine and de-interlacer, the HDP2 will automatically size 4:3 or 16:9 inputs to many DVI-D monitors. For appropriate monitor configurations, scaling is automatically 1 to 1-for example, displaying 1920x 1080 video on a WUXGA (1920×1200) monitor. The HDP2 will also automatically adapt the input frame rate for monitor compatibility. In addition, the HDP2 provides 2 channel audio monitoring and a looping output of the SDI input.

The HDP2 also supports HDMI v1.3a Deep Color (with a DVI to HDMI cable). In the HDMI mode, Deep Color is supported at 30 bits per pixel with 8 channel audio. USB connectivity allows for easy PC/Mac setup and field upgrades.

SKU: CNVHDP2 Categories: Converters, Video

DataPath X4

DataPath X4

Quad Matrix Display Controller

DataPath X4

The Datapath x4 is a stand-alone display wall controller that accepts a standard single or dual-link DVI input and can flexibly display this across four output monitors.

Each output can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. The output resolution and frame rate does not need to be related to that of the input, as the Datapath x4 display controller will optionally upscale and frame rate convert each cropped region independently.

SKU: IPX4DVI Categories: Multiviewers & Multi-Displays, Video

AJA DisplayPort to SDI

AJA DisplayPort to SDI

Mini-Converter with ROI Scaling

AJA DisplayPort to SDI

Efficiently incorporate DisplayPort computer signals into the video world with this compact ROI-DP DisplayPort to SDI Mini-Converter, from AJA. Using a simple-to-use free-download MiniConfig application (Mac/PC), select only the region of interest (portion of the image) you want converted, designate how you want the region scaled, and assign the aspect ratio and frame-rate conversion you want.

This converter also features a 3.5mm audio input for connecting separate audio to be embedded, a genlock reference input for locking the SDI signal output, and a DisplayPort loop-through output for keeping a connection to a local DisplayPort monitor during the SDI extract.

SKU: CNVROIDP Categories: Converters, Video

CatchBox Pro

Throwable Mic

CatchBox Pro

CatchBox Pro is a module that allows professionals to convert their existing beltpack transmitters into throw-able microphones. No need to buy new transmitters and receivers or change existing integrated systems, simply connect your existing beltpack into the Catchbox Pro.

SKU: CATCHBOX Categories: Microphone Accessories, Microphones, Traditional Wireless, Wireless Microphones

Barco ImagePRO-II

Barco ImagePRO-II

All-in-One Video Scaler, Scan Converter and Switcher

Barco ImagePRO-II

ImagePRO-II is an advanced high performance all-in-one video scaler, scan converter, switcher and transcoder converting any input signal format to any output format. ImagePRO-II supports Universal Analog, DVI single and dual link, HDMI, DisplayPort and SD/HD/3G SDI signal formats. Loop-through outputs are provided for the Analog, DVI and SDI input and genlock signals. With features like HDCP and EDID management, USB back up and restore, multiple video effects and web page interface, ImagePRO-II is the most advanced and flexible signal processor in the industry.

Next generation Athena scaler

Incorporating the 5th generation of the Athena scaler – Barco’s custom-designed image processing technology, ImagePRO-II supports higher resolutions, higher frame rates, higher quality de-interlacing with advanced Motion Adaptive processing, faster source acquisition, better color depth and native support for all the latest computer formats. As formats and interface requirements frequently change, the Athena scaler is built to be adaptable providing superior signal clarity, while maintaining a low processing latency of only one frame.

Simple setup and advanced control

Whether you are saving a setup for later, or need to copy a setup to multiple units, the incorporated USB back up and restore functionality makes configuration simple and efficient. ImagePRO-II is easily controlled via the front panel, browser or a mobile device. Featuring the fastest automatic source acquisition available, the ImagePRO-II excels in automatically acquiring and locking to any input signal. On the output side, ImagePRO-II can also automatically determine the format of the attached display optimizing its output resolution to match the display’s resolution.

SKU: IPIPRO2 Categories: Converters, Signal Processors, Video

Barco MatrixPRO-II

Barco MatrixPRO-II

16x16 DVI Router

Barco MatrixPRO-II

The MatrixPRO-II 16×16 DVI Router from Barco is an HDCP compliant video signal matrix router that can switch any of the 16 DVI inputs to any or all of the 16 outputs. Any input source, such as a DVD player, Blu-ray player, or a computer with high-resolution graphics, can be routed to a DVI or HDMI (via an optional adapter) output digital display.

The router accepts input resolutions from 480p up to 2048×1080 and 1920×1200. Each input is re-clocked as it passes through the router to maintain the DVI signal strength. Each channel can be programmed with unique EDID information based on the system requirements. In addition to the 16 outputs, the router features a monitoring output to which any input can be routed to and allows you to monitor and verify the input signal before it is switched to the output.

SKU: RTRDVI16XB Categories: Switchers & Routers, Video

Rentex Locations

With locations across the country, Rentex can deliver to most major cities.

Anaheim, CA

Boston, MA (HQ)

Chicago, IL

Dallas, TX

Ft. Lauderdale, FL

Las Vegas, NV

Nashville, TN

New York, NY

Orlando, FL

Philadelphia, PA

San Francisco, CA

Washington D.C.