Yamaha Rio
1608-D Remote Stage Box
Product Highlights
- 16 transparent, natural sounding microphone preamps
- 8 line outputs | Redundant and Daisy-chain Dante connectivity
- Remote configuration via Dante Controller software (free download)
- Low-latency digital audio communication
- Redundant power supplies
Rentex No. YHRIO1608
|
Mfr No. RIO1608-D
The Rio1608-D is a high-performance low-latency I/O unit for our Yamaha CL, and QL consoles (also compatible with RIVAGE and PM series consoles). This digital stagebox is loaded with 16 transparent, natural sounding microphone preamps, and 8 line outputs. The Rio1608-D connects directly to a Dante digital audio network, giving you flexible system configuration at up to 96kHz, as well offering the ability to run in redundant or daisy-chain configuration. Flexible and ease of setup; configuring and adding a Rio3224-D to your audio system is designed to be stress free.
| Sampling frequency rate | 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% |
| External | |
| Signal delay | Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz |
| Total harmonic distortion | Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min |
| Frequency response | +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz |
| Dynamic range | 108dB typ., INPUT to OUTPUT, Input Gain = Min |
| Hum & noise level | |
| Equivalent input noise | -128dBu typ., Equivalent Input Noise, Input Gain=Max |
| Residual output noise | -88dBu Residual output noise, ST master off |
| Crosstalk | -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. |
| Power requirements | US/Canada: 120V 60Hz, |
| Power consumption | 70W |
| Sound Philosophy | Natural Sound Concept |
| Grade | Inherit the sublime sound of PM series |
| Sampling Rate | 44.1/48/88.2/96kHz |
| Indicators | Sig, Peak, +48V |
| Gain Compensation | Supported |
| HA Control Redundancy from CL/QL consoles | Supported |
| Controllability from R Remote software | Supported |
| Maximum number of units using HA remotes per system | Up to 8 |
| AD8HR mode (HA control from M7CL and LS9) | Supported |
| Analog Inputs | 16 |
| Analog Input Connector | XLR-3-31 Type |
| Analog Outputs | 16 |
| AES/EBU Outputs | 0 |
| AC Inlet | V-Lock Type |
| Heights | 3U |
| Analog Input Characteristics | |
| GAIN | +66dB |
| Actual Load Impedance | 7.5kΩ |
| For Use With Nominal | 50-600Ω Mics & 600Ω Lines |
| Input Level | Nominal: -62dBu/ Max. before clip: -42dBu |
| Analog Output Characteristics | |
| Actual Source Impedance | 75Ω |
| For Use With Nominal | 600Ω Lines |
| Max.Output Level Select SW | +24dB (default) |
| Output Level | Nominal: +4dBu/ Max. before clip: +24dBu |
| Digital Input & Output Characteristics | |
| Terminal | Primary/Secondary |
| Format | Dante |
| Data length | 24bit or 32bit |
| Level | 1000Base-T |
| Audio | 24ch Input/32ch Output (Rio3224-D) |
| Connector | etherCON Cat5e |
-
32-Input, 16-Output Digital Mixer
-
16-Input, 8-Output Digital Mixer
Rent from a Partner, Not a Competitor
24/7 Sales
& Technical support
Same Day Delivery
to Most Major Cities
Competitive
Subrental Pricing
A Large Inventory of
High-Quality Equipment
Best-in-Class
QC Process
Rentex Locations
With locations across the country, Rentex can deliver to most major cities.
