Mouse roll-over to zoom image.
Product Highlights
- Detail Clarity Processor 4
- Quick Start and Quick Off
- Multi-Screen Support System
- DICOM Simulation Mode
- Waveform Monitor Function
When equipped with a supported lens (not included), the black, Quad Pixel Drive-powered Panasonic PT-REQ12L 12,000-Lumen WUXGA Laser DLP Projector offers a 1920 x 1200 resolution, but is capable of accepting content up to 4K for large venues with an incredibly bright 12,000 lumens. Even fast-motion video is supported with 240 Hz refresh on up to 2K resolution footage and a low 6 ms latency. Many features are offered for remote and customized setup and management, even with the projector powered off. The PT-REQ12L is also extremely reliable, with a IP5X dust-resistant design and water-cooled multi-laser light that do not require filters and offer nearly maintenance-free operation for up to 20,000 hours.
Projector type | 1-Chip DLP™ projectors | |
---|---|---|
DLP™ chip | ||
Panel size | 0.8 in diagonal (16:10 aspect ratio) | |
Display method | DLP™ chip x 1, DLP™ projection system | |
Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
Light source | Laser diode | |
Light output1, 2 | 12,000 lm / 12,400 lm (Center)3 | 10,000 lm / 10,300 lm (Center)3 |
Time until light output declines to 50 %4 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | |
Contrast ratio1 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
Screen size (diagonal) | 70–700 inches (with supplied lens) | |
Center-to-corner zone ratio1 |
90 % | |
Lens | PT-REQ12/REQ10: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus PT-REQ12L/REQ10L: Optional powered zoom/focus lenses |
|
Lens shift (From the origin point of the lens mounter) |
||
Vertical | ±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100) | |
Horizontal | ±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100) | |
Keystone correction range | Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500), Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500) |
|
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
HDMI™ 1/2 IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) | |
DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) | |
MULTI SYNC IN | BNC x 1 | |
MULTI SYNC OUT | BNC x 1 | |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
Expansion slot | Open slot for function boards, Intel® SDM compatible | |
Protocol versions | IPv4, IPv65 | |
Power supply | AC 100–240 V, 50/60 Hz | |
Maximum power consumption6 | 1,030 W (10.4–4.3 A) (1,040 VA) (Power consumption is 990 W at AC 200–240 V) |
870 W (8.8–3.7 A) (880 VA) (Power consumption is 840 W at AC 200–240 V) |
On-mode power consumption (Operating mode)6 |
|
|
Cabinet materials | Molded plastic | |
Operation noise1 | 38 dB (NORMAL/ECO), 35 dB (QUIET) | 36 dB (NORMAL/ECO), 33 dB (QUIET) |
Dimensions (W x H x D) |
PT-REQ12/REQ10: 498 x 212 x 648 mm (19 19/32″ x 8 11/32Ëť x 25 1/2Ëť) (With feet at shortest position) PT-REQ12L/REQ10L: 498 x 212 x 538 mm (19 19/32″ x 8 11/32Ëť x 21 3/16Ëť) (With feet at shortest position) |
|
Weight7 | PT-REQ12/REQ10: Approx. 28.7 kg (63.27 lbs) (with supplied lens) PT-REQ12L/REQ10L: Approx. 27.0 kg (59.52 lbs) (without lens) |
|
Operating environment | Operating temperature: 0–45 °C (32–113 °F)8, operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
|
Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) |
PT-REQ80Â |Â PT-REQ80L |
|
---|---|
Projector type | 1-Chip DLP™ projector |
DLP™ chip | |
Panel size | 0.8 in diagonal (16:10 aspect ratio) |
Display method | DLP™ chip x 1, DLP™ projection system |
Number of pixels | 2,304,000 (1920 x 1200 pixels) |
Light source | Laser diode |
Light output1, 2 | 8,000 lm / 8,200 lm (Center)3 |
Time until light output declines to 50 %4 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) |
Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) |
Contrast ratio1 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) |
Screen size (diagonal) | 70–700 inches (with supplied lens) |
Center-to-corner zone ratio1 |
90 % |
Lens | PT-REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus PT-REQ80L: Optional powered zoom/focus lenses |
Lens shift (From the origin point of the lens mounter) |
|
Vertical | ±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100) |
Horizontal | ±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100) |
Keystone correction range | Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500), Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500) |
Installation | Ceiling/floor, front/rear, free 360-degree installation |
Terminals | |
HDMI™ 1/2 IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
MULTI SYNC IN | BNC x 1 |
MULTI SYNC OUT | BNC x 1 |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control |
REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory |
DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) |
Expansion slot | Open slot for function boards, Intel® SDM compatible |
Protocol versions | IPv4, IPv65 |
Power supply | AC 100–240 V, 50/60 Hz |
Maximum power consumption6 | 760 W (7.7–3.2 A) (770 VA) (Power consumption is 730 W at AC 200–240 V) |
On-mode power consumption (Operating mode)6 |
|
Cabinet materials | Molded plastic |
Operation noise1 | 35 dB (NORMAL/ECO), 32 dB (QUIET) |
Dimensions (W x H x D) |
PT-REQ80: 498 x 212 x 648 mm (19 19/32″ x 8 11/32Ëť x 25 1/2Ëť) (With feet at shortest position) PT-REQ80L: 498 x 212 x 538 mm (19 19/32″ x 8 11/32Ëť x 21 3/16Ëť) (With feet at shortest position) |
Weight7 | PT-REQ80: Approx. 28.7 kg (63.27 lbs) (with supplied lens) PT-REQ80L: Approx. 27.0 kg (59.52 lbs) (without lens) |
Operating environment | Operating temperature: 0–45 °C (32–113 °F)8, operating humidity: 10–80 % (no condensation) |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) |
Rent from a Partner, Not a Competitor
24/7 Sales
& Technical support
Same Day Delivery
to Most Major Cities
Competitive
Subrental Pricing
A Large Inventory of
High-Quality Equipment
Best-in-Class
QC Process
Rentex Locations
With locations across the country, Rentex can deliver to most major cities.