Panasonic AW-RP150

Remote Camera Controller for PTZ

Mouse roll-over to zoom image.

Product Highlights

Large touchscreen for easy usability
New joystick for one-handed operation
Simplified PTZ camera presets and tracing memory
Intuitive design elements based on direct feedback from everyday robotic camera operators
3G-SDI Active Through Output, 5 x RS-422, LAN PoE+, 2 x GPIOs

Rentex No. PAAWRP150 | Mfr No. AW-RP150GJ

The AW-RP150 is the newest remote camera controller to compliment Panasonic’s comprehensive professional PTZ camera lineup. It has the same great functionality as Panasonic’s existing controllers, but includes a new one-hand operation joystick (controlling PTZ or Focus) and a large touch-panel LCD screen for monitoring and menu setting. A seesaw lever mounted on the joystick manages pan and tilt operations for zoom and focus control and intuitive single-handed operation.
The built-in touch display allows for easy and quick operation of all essential camera functions.

Panasonic AW-UE150 4K PTZ Camera and AW-RP150 PTZ Controller Brochure

Panasonic AW-RP150 Mfr Spec Sheet

Panasonic AW-RP150 Spec Sheet from Rentex

Power Requirements	12 V DC (10.8 V to 13.2 V)
PoE++	IEEE802.3at standard: DC 42 V to 57 V (Camera Input)
Current consumption	1.0 A (Connector Input) 0.6 A (PoE+ power supply)
Ambient Operating Temperature	32 °F to 104 °F
Ambient Operating Humidity	20% to 90% (no condensation)
Storage Temperature	-4 °F to 122 °F
Weight	Approx. 7.05 lb
Dimensions (W x H x D) (inch)	13-15/32 inches x 7 inches x 9-21/32 inches (excluding protrusions)
Controller Supported Equipment	IP/RS422 AW-UE150W/K, AW-HR1401, AW-HE130W/K1, AW-HN130W/K1, AW-UE70W/K1, AW-UN70W/K1, AW-HE40 Series1, AW-HN40HW/HK1, AW-HE38HW/HK1, AW-HN38HW/HK*1
INPUT	DC 12 V IN XLR 4-pin3G-SDI IN SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p2, 1080/50p2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
OUTPUT	ACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)
INPUT/OUTPUT	IP CONT: ======== 100BASE-TX ———- PoE+ input ———- Connection cable: LAN cable, max. 100 m (328 ft) ・When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ・When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ================SERIAL CONT (RJ-45): ======== RS-422 (control signals for remote cameras), TALLY OUT ———- Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) ———- TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA ================TALLY/GPIO 1 ======== D-sub 25-pin, female, inch thread ———- TALLY IN : 10 inputs (for receiving photocoupler signals) ———- GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings ================GPIO 2 ======== D-sub 25-pin, female, inch thread ———- GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature)
LCD Display	7-inch Touch Panel GUI Monitor (WVGA (800×480)
SD Memory Card slot	SDHC / SDXC Memory Card Slot x 1
No. of Connectable Cameras	200 (IP), 5 (RS422)
No. of Camera Selection Buttons	10
No. of Camera Groups	20 (10 units per 1 group)
Preset Memory	No. of memory : presets 100
Tracing Memory	No. of cameras : Cam1 to Cam10 Recording time, no. of memory settings : Maximum 5 min. total per camera, maximum of 10 settings per camera
No. of User Assignable Buttons	6 + up to 10 on the LCD menu
Pan / Tilt Speed Adjustment	7 levels
Tally LED display color	green / red