Datapath Fx4-DisplayPort

Display Wall Controller

Mouse roll-over to zoom image.

Product Highlights

DisplayPort 1.2 & HDMI 1.4 Input
Flexible Video Wall Configuration
Up to 4096 x 2160p Input at 60 fps
4 x DisplayPort 1.1 Outputs
Rotates, Crops & Scales and Multiple Controllers Can Be Looped

Rentex No. IPFX4DP | Mfr No. DATAPATH FX4/D

The Datapath Fx4 is a multi-faceted standalone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI. The Fx4 features a DisplayPort 1.2 main input alongside two HDMI 1.4 inputs offering 4K resolution. The intuitive user interface allows users to determine which input is used. Each output monitor can take its input from any region of the input image as all of the required cropping, scaling, rotation and frame-rate conversion is handled by the Datapath Fx4 hardware.

Datapath-Fx4 Datasheet

Datapath-Fx4 Manual

Datapath-Fx4 Spec Sheet from Rentex

Video Input Connectors	3G-SDI (1080p/60 or equivalent up to 148.5 MP/s) DisplayPort 1.2 (2160p/60 or equivalent up to 616 MP/s) HDMI 1.4 (2160p/30 or equivalent up to 297 MP/s)
Video Output Connectors	4 x 3G-SDI (1080p/60 or equivalent up to 165 MP/s) Loop-Through: DisplayPort 1.2 (locked to selected video input resolution)
SMPTE Standards Supported	SMPTE ST 2048, up to 60 Hz SMPTE 274M, up to 60 Hz SMPTE 296M, up to 60 Hz
Input	4096 x 2160p at 60, 8K x 8K maximum
Genlock Input	Analog black-burst on dedicated BNC connector Any video input (SDI, HDMI, DisplayPort)
Control Interfaces	2 x 100BaseT Ethernet ports with built-in managed switch USB 2.0 Type-B connector (full-speed operation)
Firmware Updates	Via USB and Ethernet connection
Power Requirements	100 to 240 VAC, 50/60 Hz, 35 W IEC switched and fused mains connector
Operating Temperature	32 to 96°F / 0 to 35°C
Storage Temperature	-4 to 158°F / -20 to 70°C
Relative Humidity	5 to 90% non-condensing
Dimensions	12.4 x 6.8 x 1.7″ / 31.6 x 17.2 x 4.2 cm
Weight	4.1 lb (1.86 kg)