The ET-C1T700 2.07-3.38:1 Projector Zoom Lens from Panasonic is an optional lens for the PT-REQ and PT-REZ series projectors. The ET-C1T700 is a standard throw lens for when the distance is approximately two to three times the image width. The zoom lens can fill a 15′ wide 16:10 or 16:9 screen from a distance of about 31′ to a distance of 50.7′ away. In 4:3 aspect ratio, the throw ratio is 2.49-4.06:1.

The ET-C1T800 / 3.34 – 6.05 :1 Projector Zoom Lens from Panasonic is an optional lens for the PT-REQ and PT-REZ series projectors. The ET-C1T700 is a standard throw lens for when the distance is approximately two to three times the image width. The zoom lens can fill a 15′ wide 16:10 or 16:9 screen from a distance of about 31′ to a distance of 50.7′ away. In 4:3 aspect ratio, the throw ratio is 3.34 – 6.05 :1 .

The ET-C1W300 0.55-0.69:1 Short-Throw Projector Zoom Lens from Panasonic is an optional lens for the PT-REQ and PT-REZ series projectors. Providing a short-throw option, the ET-C1W300 can help you bring your projector closer to the screen where needed, helping you achieve a large image in a tight space. For example, this zoom lens can fill a 200-inch diagonal 16:9 or 16:10-aspect screen with less than 10 feet between the lens and the projection surface.

The ET-C1W400 0.68-0.95:1 Short-Throw Projector Zoom Lens from Panasonic is an optional lens for the PT-REQ and PT-REZ series projectors. Providing a short-throw option, the ET-C1W400 can help you bring your projector closer to the screen where needed, helping you achieve a large image in a tight space. For example, this zoom lens can fill a 200-inch diagonal, 16:9 or 16:10-aspect screen, from around 9.5 to 13.5 feet away from the projection surface.

The Atom Grip Duo is a twin point, tilt & swivel flying adapter. It has been designed with heavier projectors in mind, like the Barco UDX series and can support enough weight for double stacked projectors.  With a twin point hanging system, the Atom Grip Duo can take full advantage of the adjustments without the truss twisting, which can be an issue when rigging extremely heavy projectors at an angle with a single point attachment. Designed for hanging on box truss, the Atom Grip Duo features adjustable clamps which and can be located in several positions for use with different sizes of truss.
The Atom Grip Duo offers a simple solution for twin point projector hanging, with captive fixings it can be easily attached to a projector rental frame.  Angled adjustments can be achieved via the ratchet handle, moving the handle to the right loosens the mechanism to allow 25° tilt and 360° rotation.  Moving the handle back to the right locks the adjustments in position.