Barco Equipment Rentals Available Nationwide

Narrow by:

Barco EC-30

Small event controller

Barco EC-30

A small event controller, specifically designed for events with space limitations. Full show control at your fingertips. Instant access to crucial functionalities

The EC-30 is the most compact version of the Event Master controllers delivers instant access to the most crucial features, for everything from a tradeshow booth to a large corporate event, or even a music tour.

The EC-30 gives the operator a compact surface and simplified workflow, while still providing fingertip control where budget and space are the deciding factors. The EC-30 is an extension of the Event Master toolset, bringing the essential selections for sources, presets, layers and destinations to your fingertips. As a USB peripheral added to your existing Event Master control computer, it is the most cost-effective and compact alternative to a full-sized controller.

SKU: CTLEC30 Category: Signal Processors

Barco PDS-4K SDI with Audio and DP Expansion

Full featured 10-in 4-out multi-format multi-screen video switcher with Dante audio

Barco PDS-4K SDI with Audio and DP Expansion

Carrying Barco switching pedigree to small and mid-sized rooms, the Barco PDS-4K SDI enables single, dual, and quad screen switching with high-quality 4K processing. Equipped with the optional interface card, the PDS-4K SDI adds Dante audio routing and has a total of 10 inputs including (6) HDMI 2.0, (2) 12G-SDI, and (2) DisplayPort 1.2 – all mixed on up to four seamless mixing program outputs at low latency along with a multi-viewer. Each output is available by HDMI 2.0 and 12G-SDI simultaneously. Auto-setup features and front panel control for most set-ups, or drive a more complex event using Event Master Toolset – the same software used with Barco e2 and S3.

SKU: SWPDS4K Categories: Signal Processors, Switchers & Routers

Barco CXP IO Card from Rentex

Barco CXP I/O Card

Add CXP input or output to Barco ex for Linked systems

Barco CXP I/O Card

The CXP I/O card adds the ability to extend up to 8 inputs or outputs to an EX Chassis in a linked E2 or S3-4K system.

SKU: ENC2023

Barco EC-210 from Rentex

Barco EC-210 Large Event Controller

Large controller for advanced Event Master (e2, s3) systems

Barco EC-210 Large Event Controller

The Barco EC-210 Large Event Controller is the perfect companion for any moderate to advanced Event Master application. The same direct access destination and layer keys, 3 rows of dynamic Assign bus keys with LCD, and high resolution T-bar carry over from the EC-50. To that we add more direct access programming keys, 12 dynamic contextual keys with LCD, and a 10-key number pad for quick access to any destination, layer, source, or positional input. Five jog wheels are on board to give coarse or fine adjustment for window sizes and positions. Dual touchscreens and cue list buttons are also included.

An upgraded replacement for the EC-200, the EC-210 has an improved integrated core system for running any Event Master processor in stand-alone mode with the best performance.

SKU: CTLEC210 Category: Signal Processors

Barco Fiber Output Card from Rentex

Barco Event Master Fiber Output Card

Direct Fiber output for e2, s3, EX

Barco Event Master Fiber Output Card

Reduce complexity and failure points with the Event Master Fiber Output card. Many of today’s live events use fiber to transmit signals relying on external fiber extenders that lead to growing costs. With native 4k60p processing, the fiber output card eliminates the need for external fiber extenders using 12G, 6G and 3G signal formats. The fiber output card is designed using proven robust broadcast standards supporting SMPTE 297M for Optical Fiber SDI. This standards based system is directly compatible with AJA FIDO units and other SDI fiber products found in our product catalog.

SKU: ENC2025

Barco HDQ 2K40

Barco HDQ 2K40

40,000 Lumens 3-Chip DLP Projector

Barco HDQ 2K40

The world’s brightest projector for the rental and staging industry, Barco’s HDQ-2K40 ensures razor-sharp, ultra-bright images, guaranteeing an unequalled event experience on every occasion. Thanks to its 40,000 lumens light output and 2K resolution, the top-of-the-line HDQ-2K40 displays stunning images combined with ultimate brightness and rich vibrant colors time after time. The HDQ is also equipped with Barco’s high-end ImagePRO technology with Athena scaler for flexible scaling. The Barco’s built-in color LCD screen provides all the information you need on your projector’s connected sources, status, power, temperatures and lamp run-time and allows you to preview your connected sources. In addition, you can easily control your HDQ-2K40 via your smart phone or tablet computer.

SKU: HDQ Category: 10,000 lumens & Above Tag: barco e2

Barco UDX-4K40

37,500 Lumens 3-Chip DLP Laser Projector

Barco UDX-4K40

The UDX-4K40 features 4K UHD resolution and 37,500 lumens light output to ensure flawless shows with accurate colors. Without compromising on brightness, the UDX color quality matches the renowned Xenon quality and outperforms the Rec. 709 color space.

SKU: -UDX4K40 Categories: 10,000 lumens & Above, Laser Projectors

Barco HDF-W30 Flex

30,000 Lumens 3-Chip DLP Projector

Barco HDF-W30 Flex

Thanks to its high light output, the HDF-W30 FLEX offers impressive performance for large venues – even when there’s lots of ambient light. Designed for life on the road, the rugged and modular projector is easy to install and service. And when equipped with a rental frame, it can easily be stacked or rigged. Just like the RLM, HDX, HDF and FLM projector families, the HDF-W30 FLEX uses the TLD lens suite.

Geared with 3-chip DLP technology, single Xenon lamp illumination, and a high-contrast optical engine, the HDF-W30 FLEX makes no compromises on brightness, color accuracy, and stability. Its Xenon lamp color accuracy delivers the best performance required for premium large-screen projection. Plus, the projector’s also equipped with Barco’s cutting-edge ImagePRO technology for remarkable scaling power.

The HDF-W30 FLEX‘s most remarkable benefit is that it offers FLEX brightness as standard. In this way rental companies have the flexibility to tune the projector’s brightness to a specific show – from 18,000 to 30,000 lumens in incremental steps of 2,000 lumens.

SKU: HDFW30 Category: 10,000 lumens & Above

Barco UDM-4K22

21,000 Lumen, 4K UHD, 3-Chip DLP Laser Projector

Barco UDM-4K22

Weighing less than 110 pounds, this is the lightest 21K projector on the market. And while the compact and light-weight design of the UDM-4K22 saves you lots of set-up time and reduces shipping costs, it never compromises on the quality or brightness of your projection. The UDM-4K22 features 4K UHD resolution and 21,000 lumens light output to deliver impactful 4K experiences with mind-blowing colors. The UDM projector offers the widest color spectrum for 22K laser phosphor projection available.

With the Barco Pulse proprietary single-step processing technology warping, scaling and 4K UHD processing is done in only one step. The result? Razor-sharp images, market leading lowest latency, and less dark time than comparable projectors.

SKU: UDM4K22 Categories: 10,000 lumens & Above, Laser Projectors

Barco E2 from Rentex

Barco E2 Gen 2

High Resolution Live Event Switcher

Barco E2 Gen 2

Raising the bar for screen management, the E2 presentation systems provide superior image quality, exceptional input and output density, great expandability and durability. Supporting native 4K input and output, it was the first screen management system to manage 4K projector blends with refresh rates up to 60Hz with full 4:4:4 color sampling and 12bit processing. A truly versatile system, it offers eight mixable PGM outputs and four scaled Aux Outputs for full show control within a single box. Multiple E2s can be linked together to process extremely large pixel canvases supporting the largest displays available.

Go 4K all the way

With up to 40 inputs and 18 outputs, the E2 Gen 2 processor provides full screen control. The E2 Gen 2 offers 16 4K inputs and 8 4K outputs enabling impressive pixel processing power with increased processing speed. Whether native or scaled inputs, single cable 4K60p, two connectors or four, this HDCP-compliant system manages it all. Thanks to its linkable chassis, it can easily expand beyond the capabilities of a single box without the need for additional external processing and matrix routing to distribute the signals.

SKU: SWE2G2 Categories: Signal Processors, Video

Barco DisplayPort 1.2 Quad Input Card

Compatible with S3, E2, EX and ImagePRO-4K

Barco DisplayPort 1.2 Quad Input Card

SKU: ENC2011

Barco DisplayPort 1.2 Quad Output Card

Compatible with S3, E2, EX and ImagePRO-4K

Barco DisplayPort 1.2 Quad Output Card

SKU: ENC2017

Barco HDMI 2.0 Quad Input Card

Compatible with S3, E2 and E2 Gen 2

Barco HDMI 2.0 Quad Input Card

SKU: ENC2009

Barco HDMI 2.0 Quad Output Card

Compatible with S3, E2 and E2 Gen 2

Barco HDMI 2.0 Quad Output Card

SKU: ENC2019

Barco ImagePRO-4K from Rentex

Barco ImagePRO-4K

All-in-One Video Scaler, Scan Converter and Switcher

Barco ImagePRO-4K

Superb performance

ImagePRO 4K easily scales, converts and switches the highest quality signals without latency (4K, 4:4:4, 60p, 10-bit) to ensure the smoothest images. The latest I/O standards, HDMI 2.0, DP 1.2 and 3G-12G SDI are seamlessly converted for unparalleled flexibility.

Road-ready and reliable

Like all Barco’s image processing products, the ImagePRO 4K is built to provide long-life performance both for fixed installs as well as for life on the road. What’s more, the live-source view on the front panel provides a clear view of the incoming signal giving you the confidence you need to execute your event flawlessly.

SKU: IPIPRO4K Categories: Converters, Signal Processors, Video Tags: image pro, imagepro 4k

Rentex is happy to offer a hand-picked selection of Barco equipment to our cross-rental customers throughout the AV industry. As a trusted equipment provider to top production, staging, and live event companies we deeply understand the unique and demanding needs of the AV community. All our Barco rental equipment undergoes a rigorous quality control check after each rental, and arrives at your location supported by Rentex’s industry-leading service, ensuring your rental stays worry-free.

Rentex Locations

With locations across the country, Rentex can deliver to most major cities.

Anaheim, CA

Boston, MA (HQ)

Chicago, IL

Dallas, TX

Ft. Lauderdale, FL

Las Vegas, NV

Nashville, TN

New York, NY

Orlando, FL

Philadelphia, PA

San Francisco, CA

Washington D.C.