The Meyer Sound MM-4XP miniature loudspeaker is a self-powered loudspeaker designed for high-quality distributed systems. The Meyer Sound MM-4XP adds the advantages of self-powered systems, with onboard amplification and signal processing. The Meyer Sound MM-4XP’s proprietary 4-inch cone transducer delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion. The Meyer Sound MM-4XP exhibits the same high intelligibility and flat frequency and phase responses for which Meyer Sound loudspeakers are known.

Frequency Response: 135 Hz – 17 kHz ±4 dB

Impedance: 10000 ohm

Input Impedance: 10 kohms differential between pins 2 and 3

Sensitivity: 2.50 dBV

Wiring: Pin 1: Chassis/earth through 220 k Ohms, 1000 pF, 15 V clamp network, to provide virtual ground lift at audiofrequencies, Pin 2: Signal +, Pin 3: Signal -, Case: Earth ground and chassis

Signal to Noise: >110 dB

Phase Response: 400 Hz – 20 kHz ±45 Degree

Power Handling: 100 Watt

DC Voltage: 48 Volts

Overall Length: Female XLR input with male XLR loop outputor VEAM all-in-one connector (integrates AC, audio and network)

Maximum SPL (Sound Pressure Level): 113 dB

THD, IM, TIM: <.02 %

Peak Power: 440 Watt

Active Power: 220 Watt

Coverage Horizontal: 80 degrees

Coverage Vertical: 80 degrees

Color: Black

Construction: Perforated steel, Extruded aluminum

Minimum Frequency Response (Bandwidth): 120 Hz

Minimum Frequency Response (Bandwidth): 0.12 kHz

Maximum Frequency Response (Bandwidth): 18000 Hz

Maximum Frequency Response (Bandwidth): 18 kHz

Rackmountable: Yes

Current Draw: 2.20 Amps

Dimensions (HxWxD): 4.04″ x 4.04″ x 5.72″

Product Weight: 4.20 lbs