Barco MatrixPRO-II 32×32
3G SDI Switcher
Product Highlights
- 32×32 Wideband Switcher with 3G SDI
- Transmits 1080p @ 60Hz
- 600MHz at -3dB Bandwidth
- +/-1.0dB to 300MHz Flatness
- Switches / Distributes without Artifacts
The Barco MatrixPRO-II 32×32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.
A genlock input synchronizes all switching with the house sync. A user selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub switchers and let each color channel switch independently.
| Supported Formats | DVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps – 2.97Gbps; 2K, 2048×1556/23.98 and 24 |
| Inputs | |
| Standard | SMPTE 259M / SMPTE 292M / SMPTE 424M |
| Data Rate | 270Mbps – 1.485Gbps / 2.97Gbps |
| Connector | 75 ohm BNC female |
| Impedance | 75 ohm nominal |
| Return Loss | > 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz) |
| Cable Equalization | Automatic up to 230′ (70m) @ 2.97Gbps, typical Belden 1694A Automatic up to 328′ (100m) @ 1.485Gbps, typical Belden 1694A Automatic up to 984′ (300m) @ 270Mbps, typical Belden 8281 |
| Outputs | |
| Connector | 75 ohm BNC female |
| Impedance | 75 ohm nominal |
| Return Loss | > 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz) |
| Signal Level | 800mVp-p ±10% |
| Rise & Fall | – 20 – 80% – SD limit: 0.4 – 1.5ns, < 0.5ns rise/fall variation – HD limit: < 270ps, < 100ps rise/fall variation – 3G-HD limit: < 135ps, < 50ps rise/fall variation |
| Amplitude Overshoot | < 10% |
| Signal Polarity | Non-inverting electrical with respect to inputs |
| Power & Other Parameters | |
| Power | 35W |
| Signal Speed | Timing jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI |
| Safety Regulations | Compliant with CE EN55103-1 and 2 |
| Control | Serial port: RS-232, DB9 connector female Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector |
| Rack Mount | 2RU |
| Dimensions | 3.5 x 19 x 2″ (8.8 x 48.3 x 5 cm) |
| Weight | 4.8 lbs (2.2 kg) |
-
DVI Switcher
-
RGBHV Switcher
-
HDMI 1.3 DA
-
HDMI DA
-
HDMI DA
-
HDMI Splitter/DA
-
Dual-Link DVI Splitter
-
1x16 VGA DA
-
VGA DA
-
Video Recorder
Rent from a Partner, Not a Competitor
24/7 Sales
& Technical support
Same Day Delivery
to Most Major Cities
Competitive
Subrental Pricing
A Large Inventory of
High-Quality Equipment
Best-in-Class
QC Process
Rentex Locations
With locations across the country, Rentex can deliver to most major cities.
