Extron DA6 RGBHV

6 Output Wideband

Mouse roll-over to zoom image.

Product Highlights

1×6 RGBHV Distribution Amplifier
Video Bandwidth: 350MHz
Selectable gain and peaking
Input: One set of female BNC connectors | Output: Six sets of female BNC connectors
Compatible with RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video signals

Rentex No. RGBHVDA6 | Mfr No. 60-490-01

The Extron DA6 RGBHV is a six output, rack-mountable, analog distribution amplifier. It accepts and distributes RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video on female BNC connectors. In addition, the DA6 RGBHV provides DIP switches for adjusting RGB gain and peaking, as well as for selecting AC or DC coupling. A 9-pin contact closure connector allows for output muting controls when used with a control system.

With 350 MHz (-3 dB) video bandwidth, fully loaded, the DA6 RGBHV is perfect for maintaining signal integrity over long cable runs It includes an internal international power supply and is housed in a 1U, full rack width metal enclosure for mounting convenience.

Rentex Spec 60-490-01

Extron DA6 RGBHV Specifications

Extron DA RGBHV Series Brochure

Extron DA RGBHV Series Catalog

Video
Gain	Unity (0 dB) or 1.1 dB (110%), switch-selectable When input = 0.7 V, output = 0.7 V or 0.8 V, respectively.
Peaking
DA6 YUV A	0 dB
All other models	0 dB or +6 dB at 100 MHz, switch-selectable
Bandwidth	350 MHz (-3 dB), fully loaded
Differential phase error	<1.0° at 5 MHz
Differential gain error	<1.0% at 5 MHz

Video input
Number/signal type	1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
Connectors	5 female BNC
Nominal level (at unity gain)	1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB, for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 180 kHz
Vertical frequency	15 Hz to 170 Hz
Return loss	<-38 dB @ 5 MHz
DC offset (max. allowable)	5.0 V (in AC coupling mode)
Input coupling	AC/DC, switch-selectable

Video output
Number/signal type	2, 4, or 6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
Connectors	(2, 4, or 6) x 5 female BNC
Nominal level	1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB, for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 Vp-p to 1.5 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-44 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset

Sync
Input/output type	RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Input level	Analog or TTL: 0.5 V to 5 Vp-p
Output level	TTL: 5 Vp-p, unterminated
Input impedance	510 ohms
Output impedance	75 ohms
Max. input voltage	5.0 Vp-p
Max. propagation delay	35 ns
Max. rise/fall time	4 ns
Polarity	Positive or negative (follows input)

Control/remote
Contact closure	1 female 9-pin D connector
Contact closure pin configuration	Pin 1 = mute output #1, pin 2 = mute all outputs, pin 3 = reserved, pin 4 = mute output #2, pin 5 = GND, pin 6 = mute output #3, pin 7 = mute output #4, pin 8 = mute output #5, pin 9 = mute output #6

General
Power	100 VAC to 240 VAC, 50-60 Hz, 10 watts, internal
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount
DA2 RGBHV	Yes, with optional 1U rack shelf
DA4/6 RGBHV	Yes, with included mounting kit
Furniture mount
DA4/6 RGBHV	Yes, with included mounting kit
Enclosure type	Metal
Enclosure dimensions
DA2 RGBHV	1.7″ H x 8.7″ W x 9.4″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 23.9 cm D)
DA4/6 RGBHV	1.75″ H x 17.5″ W x 8.5″ D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 21.6 cm D) (Depth excludes connectors.)
Product weight
DA2 RGBHV	2.0 lbs (0.9 kg)
DA4 RGBHV	3.7 lbs (1.7 kg)
DA6 RGBHV	3.9 lbs (1.8 kg)
Shipping weight
DA2 RGBHV	4 lbs (2 kg)
DA4/6 RGBHV	7 lbs (4 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI