Barco HDF-W30 Flex

30,000 Lumens 3-Chip DLP Projector

Mouse roll-over to zoom image.

Product Highlights

WUXGA Resolution (1920×1200)
1900:1 Contrast Ratio | 16:10 Aspect Ratio
218.25 lbs | 27.8 x 21.5 x 40.3″ (WxHxD)
Power Requirements: 30 AMP, 250V, L6-30P
Lens Options: 0.40:1, 0.8-1.16:1, 1.16-1.49:1, 1.39-1.87:1, 1.87-2.56:1, 2.56-4.17:1, 4.17-6.95:1, 6.93-10.3:1

Rentex No. HDFW30 | Mfr No. R9004540 (HDF-W30 FLEX)

Thanks to its high light output, the HDF-W30 FLEX offers impressive performance for large venues – even when there’s lots of ambient light. Designed for life on the road, the rugged and modular projector is easy to install and service. And when equipped with a rental frame, it can easily be stacked or rigged. Just like the RLM, HDX, HDF and FLM projector families, the HDF-W30 FLEX uses the TLD lens suite.

Geared with 3-chip DLP technology, single Xenon lamp illumination, and a high-contrast optical engine, the HDF-W30 FLEX makes no compromises on brightness, color accuracy, and stability. Its Xenon lamp color accuracy delivers the best performance required for premium large-screen projection. Plus, the projector’s also equipped with Barco’s cutting-edge ImagePRO technology for remarkable scaling power.

The HDF-W30 FLEX‘s most remarkable benefit is that it offers FLEX brightness as standard. In this way rental companies have the flexibility to tune the projector’s brightness to a specific show – from 18,000 to 30,000 lumens in incremental steps of 2,000 lumens.

Rentex Spec HDF-W30

Barco HDF-W30 Mfr Spec

Barco HDF W Series Quick Start Guide

Barco FLM HDF Series Technical Drawing

(1) BARCO HDF-W30 PROJECTOR
(1) Lamp: Barco HDF-W26
(1) Barco Projector Remote Rugged
(1) Projector USB Manual
(1) L630P to Barco Multi Pin
(4) Projector Clamp HDX

Projector type	WUXGA 3-chip DLP digital projector
Technology	0.96″ DMD™ x3 sealed DLP core
Resolution	1,920 x 1,200 – 16:10 aspect ratio
Brightness	30,000 center lumens / 28,000 ANSI lumens*
Contrast ratio	1,900:1 (standard) / 2,200:1 (high contrast mode)
Brightness uniformity	90%
ScenergiX	Horizontal and vertical edge blending
Lenses	TLD+ 0.73:1 ; 1.2:1 ; 0.8-1.16 ; 1.16-1.5:1 ; 1.5-2.0:1 ; 2.0-2.8:1 ; 2.8-4.5:1 ; 4.5-7.5:1 ; 7.5-11.5:1
Optical lens shift	V: -30% to +120% / H: -40% to +40% on zoom lenses (memorized)
Color correction	P7
Lamps	4.0 kW xenon
Lamp lifetime	600 Hrs
Transport with lamp	Yes
Lamp house, quick replace	Yes
Customer bulb replace	Yes
Optical dowser	Standard
Picture-in-picture	Two sources simultaneously
Orientation	table – ceiling – side (portrait)* – vertical / * lamp door down/bottom
DMX 512	standard
WARP	Direct adjust OSD + toolset
Integrated web server	Yes
CLO (constant light output)	Standard
3D	Triple flash up to 200Hz/Optional: active eyewear, passive Infitec, passive circular
Inputs	DVI-I (HDCP including analog RGB YUV), SDI/HDSDI/Dual HDSDI/3G/BarcoLink
Optional Inputs	5-BNC RGBHV (RGBS/RGsB, YUV CS/SOY, Composite video, S-Video); DVI-I (HDCP including analog RGB YUV) + BarcoLink/SDI/HDSDI/Dual HDSDI/3G; 3D active input (HDMI/DisplayPort) feat. SENSIO 3D
Input resolutions	From NTSC up to QXGA (2,048 x 1,536)
Max. pixel clock	200 MHz
Software tools	Projector Toolset + Android app + iOS app
Control	XLR wired + IR, RS232, Wifi, GSM (opt)
Network connection	10/100 base-T, RJ-45 connection, Wifi (optional)
Power requirements	200-240V / 50-60Hz
Max. power consumption	4,800W / STBY < 10W
Noise level (typical at 25°C/77°F)	60dB(A)
Operational ambient temperature	0-40°C / 32°-104°F
Operational humidity	0-80% (non condens)
Dissipation BTU	Max. 16,378 BTU/h
Dimensions (WxLxH)	707 x 1,025 x 548mm / 27.83 x 40.35 x 21.57 inches
Weight	99kg (218.25lbs)
Certifications	UL60950-1 and EN60950-1,FCC rules & regulations,part 15 Class A and CE EN55022 Class A,RoHS